thermal heat insulation coatin > heat resistant thermal insulation ceramic epoxy coating

heat resistant thermal insulation ceramic epoxy coating

BD303 wear abrasion heat resistant thermal insulation ceramic epoxy coating

Product features of BD303 wear resistant epoxy ceramic thermal heat insulation coatings:
Heat resistant antioxidant resin as the basic,nano glass beads as the heat insulating material,the special addition agent as
the adjust and control.Make the resin and thermal insulation material to achieve the best ratio with unique technology,
obtain the best effect of heat insulation.This material has good corrosion resistance at the same time.

Range of application:
Thermal insulation and heat preservation of the equipment part based on the temperature below 250 degree.
Saving energy and reducing consumption.Such as heat ex-changers,steam pipe,hot water pipeline,oil pipeline,
the gas flue,dust collector,storage tank etc.

Performance index of BD303 heat thermal insulation abrasion resistant epoxy ceramic coating:

Appearance	Coating thickness (mm)	Thermal conductivity （W/m·K）	Construction temperature（℃）	Density (g/cm3)	The highest working temperature（℃）
Gray	0.3-30	0.03	5-70	0.9	250

How to use:
1.Substrates surface treatment:Coarsening and cleaning the surface of pending-repair.

2.The preparation of the material according to the specified ratio,then stir it uniformly with the electronic blender.

3.Make the heat insulation protective epoxy coating material be coating on the surface of the workpiece within 30 min,
if the thermal insulation performance requirements is high,the thermal conductive coating is thick,
you can be coating for 2-3 times,coating for the next layer after the front layer initial curing.

4.Curing:It will be initial curing based on curing for about one and a half hours at room temperature of 25 degree,
it can be put into using after curing for 6 hours.

5.The coating viscosity is large during construction in winter,you can configure it after heating it up to the
temperature of 40 degree.

Product packaging photo of BD303 anti abrasion wear resistant thermal heat insulation ceramic coatings:

------分隔线----------------------------